-40%
Makita Impact Driver TD172DZ Blue 18V Body Tool Only no Battery
$ 119.16
- Description
- Size Guide
Description
Makita Impact Driver TD172DZ Blue 18V Body Tool Only no Battery
Main function
Maximum tightening
Torque (Nm) Tightening capacity (mm): 180
Machine screw: M4 to M8
Ordinary bolt: M5 to M16
High-strength bolt: M5 to M14
Course thread: 22-125
.
Strike mode / Rotation speed (min-1) [Rotation / min] / Strike count (min-1) [Time / min]
Fastest / 0-3,600 / 0-3,800
Strong / 0-3,200 / 0-3,600
Medium / 0-2,100 / 0-2,600
Weak / 0 to 1,100 / 0 to 1,100
Wood / 0-1,800 / 0-3,800
Bolt (when rotating forward) / 0 to 3,600 / 0 to 3,800
For tex (thin plate) / 0-2,900 / Stop immediately after hitting
For tex (thick plate) / 0-3,600 / 0-2,600
Machine dimensions (mm) (length x width x height): 114 x 81 x 236
Mass (kg) (including battery): 1.5
Standard accessories: Plus bit 2-65 hook
Work volume per charge (approximate) / screw tightening *
Wood screws Ø5.4 × 90mm: Approximately 550
Wood screws Ø4.3 × 65mm: Approximately 960
Machine screw M8 x 16mm: Approximately 5,280
The industry's smallest tilt with a slim body
Approximately 10.5 ° *
Excellent cornering performance reduces come-out. Work near the wall is also comfortable.
Recommended for work near the floor
Bit runout industry's smallest "zero blur" *
Double ball bearings are used for the bearings.
Significantly reduces runout when using long bits. Both durability are compatible.
New one-touch bit sleeve
Just push in lightly without pulling the sleeve.
Plug-in load reduced by approximately 50% (compared to our conventional model).
Unexpected bit loss is also reduced, and the anvil rigidity is increased by about 25% (compared to our conventional 18V machine).
Assisting more work "Easy 4 modes"
The optimum mode can be selected according to the work.
① Wood mode
② Bolt mode
③ Thick plate tex mode
④ Thin plate tex mode
① Wood mode
Fully open the trigger to start tightening slowly, and automatic transmission for the fastest tightening.
② Bolt mode
Fastest instantly with normal rotation / trigger ON.
Reverse / Automatic stop when nut loosens.
(Reverse auto stop)
③ Thick plate tex mode
Reduces screw head skipping and come-out.
④ Thin plate tex mode
After the screw penetrates, it automatically stops when hit is detected.
Blow mode 4-step switching
Switch to fastest / strong / medium / weak with the "hit button".
Supports everything from tightening with priority on power and speed to delicate tightening of machine screws.
Hand button
You can switch the striking mode while holding the grip.
Mode memory function
By pressing two buttons at the same time, you can register one frequently used mode.
Switch between "mode used until just before" and "registration mode" with the hand button.
Compact 114mm
The overall length is further shortened, and excellent workability even in tight spaces.
Always lit With "light mode"
① Set the forward / reverse switching lever to the neutral state ...
② When you pull the trigger, the LED light turns on / off.
If no operation is performed, the light turns off automatically after about 1 hour.
There are two LED lights on the left and right.
As simple lighting
Can also be used as simple lighting in "light mode".
"Apt" drip-proof and dust-proof
This product is designed to reduce the effects on water and dust, but we do not guarantee that it will not be damaged by water or dust.
Equipped with high power brushless motor
High output, high durability, maintenance-free.
Other features
・ With hook
・Variable speed
・ Forward / reverse switching
・ With brake