16XTS Commercial Grade Christmas Tree Stand for trees 20-30 feet tall

Description

The 16XTS is a commercial grade Christmas tree stand, the largest one we offer. Designed to hold trees ranging in size from 20 to 30 feet tall, this large Christmas tree stand will keep your extremely large tree safe and secure. The stand features an 82" wide stance at the base, so you can be assured that your tree will be well supported and won't tip over.
Features:
Holds trees up to 30 feet tall
Maximum trunk diameter 14"
Water reservoir holds approximately 6.5 gallons
Specifications:
Maximum Tree Size: 30 feet high x 14" maximum diameter trunk
Weight: 107 lbs with legs
Stance (widest dimension): 82"
Materials: reservoir is made from 16" standard wall .378" thick steel pipe; feet are 1-1/2" x 1-1/2" x 1/8" thick square steel tubing
Water reservoir holds appx. 6.5 gallons
Ships via FedEx Ground from Bear Lake, Michigan
16XTS Assembly Instructions:
You will need help with this size of tree and stand, so be sure to have several people to help. There should be 9 parts to your stand. The main bowl, 4 T-handles, and 4 legs.
Step By Step Instructions:
After making a 2" fresh cut off of the bottom of your tree, drill a 3/4'' diameter hole approximately 2 inches deep in the bottom center of the tree trunk.
Lay the tree down on its side flat.
Lay bowl of the stand on it's side.
Make sure that the lag bolt in the bottom of the stand is inserted into the hole that you drilled in the trunk of the tree.
Tighten the 4 T-handles.
Install 2 legs on the stand with the legs sticking up, DO NOT USE THEM AS LEVERS.
Stand the tree upright, insert the other 2 legs.
Tighten the tree securely and you should be all set. You should arrange your decorations evenly all the way around the tree to keep the tree balanced. Enjoy a safe holiday!